Intrusion panel for use in security installations, as intrusion alarm control equipment certified for Grade 4. Integrated within the VIGIPLUS centralized system through a standard TCP/IP link. Field data management is carried out through the RS485 BUS, to which the Zone input/output modules E2204 / E2216 and control keyboards T2210 are connected. The maximum bus length is 1000 meters (point to point), although if necessary D224C / D224F signal amplifiers/distributors can be placed, which allow alternative bus distributions. Maximum capacity for each sub-control unit: 128 zone inputs (4 integrated into the control unit itself), 64 actuation outputs (2 integrated into the control unit itself) and 64 partitions. It has an ATS interface via UDP. It has a memory of 650 events, as well as a general alarm output for autonomous operation. Solid state memory and independent clock for identification of events in memory. Dedicated inputs for power failure and battery failure. Incorporates an FS2312 smart power supply (250 mA). Led indicators for diagnosis during start-up. Connection using plug-in power strips. Power supply: 230 Vac. Maximum consumption: 30W. Temperature range: -10 to 55 ºC. Circuit dimensions: 105.5 x 153 x 24 mm. Box dimensions: 400 x 400.5 x 95 mm.
Intrusion control panel for use in security installations, as Grade 4 certified intrusion alarm control equipment. Integrated into the VIGIPLUS centralized system through a standard TCP/IP link. Field data management is carried out through the RS485 BUS, to which the E2204 / E2216 Zone input/output modules and T2210 control keyboards are connected. The maximum length of the bus is 1000 meters (point to point), although D224C / D224F signal amplifiers/distributors can be installed if necessary, allowing alternative bus distributions. Maximum capacity for each sub-control unit: 128 zone inputs (4 integrated into the control unit itself), 64 actuation outputs (2 integrated into the control unit itself) and 64 partitions. It has an ATS interface via UDP. It has a memory of 650 events, as well as a general alarm output for operation in autonomous mode. Solid state memory and independent clock for the identification of events in memory. Dedicated inputs for power failure and battery failure. It incorporates an intelligent power supply FS2312 (250 mA). Led indicators for diagnosis during start-up. Connected by plug-in terminals. Power supply: 230 Vac. Maximum consumption: 30W. Temperature range: -10 to 55ºC. Circuit dimensions: 105.5 x 153 x 24 mm. Box dimensions: 400 x 400.5 x 95 mm.
Una vez que el usuario haya visto al menos un producto, este fragmento será visible.
Productos vistos recientemente
To install this Web App in your iPhone/iPad press 
and then Add to Home Screen.
