Intrusion control panel for use in security installations, as a Grade 4 certified intrusion alarm control equipment. Integrated within the VIGIPLUS centralized system through a standard TCP / IP link. The field data management is carried out through the BUS in RS485, in which the E2204 / E2216 Zone input / output modules and T2210 control keyboards are connected. The maximum length of the bus is 1000 meters (point-to-point), although if necessary amplifiers / signal distributors D224C / D224F can be placed, which allow alternative bus distributions. Maximum capacity for each substation: 128 zone inputs (4 integrated in the control panel itself), 64 actuation outputs (2 integrated in the control panel itself) and 64 partitions. It has an ATS interface via UDP. It has a memory of 650 events, as well as a general alarm output for operation in autonomous mode. Solid state memory and independent clock for the identification of events in memory. Dedicated inputs for power failure and battery failure. It incorporates an intelligent power supply FS2312 (250 mA). Led indicators for diagnosis during start-up. Connection through plug-in strips. Power supply: 230 Vac. Maximum consumption: 30W. Temperature range: -10 to 55 ºC. Circuit dimensions: 105.5 x 153 x 24 mm. Box dimensions: 400 x 400.5 x 95 mm.