List of products by brand Aeotec

Z-Wave Plus wireless technology

Compatible with all Z-Wave panels

Dimmable White: 2700K to 6500K

Brightness up to 806 lumens

CRI: 80

Power: 220V ~ 240V AC, 50Hz

Bulb for E27 sockets

9.5W maximum power consumption

240° radiation angle

Module Type: Z-Wave Repeater

RF frequency: 868.42MHz

Transmission distance: up to 30m indoors / 150m outdoors and open field

Compatible with all Z-Wave panels

Plug type: E/F plug

Power supply: 230V AC /50Hz, maximum 150mA

Consumption: 1.2W

Degree of protection IP20

Dimensions: 46 x 46 x 60.65 mm (including plug)

Module type: Z-Wave receiver

Frequency: 868.42Mhz

Transmission distance up to 150m in open field

Compatible with all Z-Wave panels

Wiring: 3 wires, neutral required

Maximum load: 2.5A

LED status indicator

Power: 120V ~ 240V AC, 50/60Hz

Standby power consumption: <0.8W

Operating temperature from 0° ~ +40°C

Operating humidity: 8% ~ 80%

Dimensions: 42.5 x 40 x 20mm

Certifications: FCC, UL, CE, ROHS

Built-in wireless module

Z-Wave Plus wireless technology

Integrate existing installations (lighting, ceiling fans) into a Z-Wave network

Compatible with all Z-Wave panels

Works with momentary or toggle switches

Power supply: 230V AC, 50 Hz

Compatible with 2 and 3 wire wired systems (with and without neutral)

Power consumption: <0.8W

Dimensions: 42.5 x 40 x 20mm

Z-Wave Plus wireless technology

Compatible with all Z-Wave panels

Up to 16 million colors

Light aspect: 2700K to 6500K

Brightness up to 806 lumens

CRI: 80

Power: 220V ~ 240V AC, 50Hz

Bulb for E27 sockets

Maximum power consumption 9.5W

240° radiation angle

Smart switch

Control lighting or device through Z-Wave controls

The smallest and safest smart plug

SGS certified

Installation in 5 seconds

Integrates SmartStart 3 layers of wireless security

Integrated surge protection up to 10 amps

CE regulations EN60950 and EN301489

Z-Wave receiver module

RF frequency: 868.42Mhz

Transmission range: 150m in open field

Compatible with all Z-Wave panels

Wiring: 3 wires

Max load: 10A

Power measurement accuracy: ±3W

LED status indicator

Power supply: 230V AC, 50/60Hz

Standby power consumption: 0.8W

Operating temperature from 0°C ~ +40°C

Operating humidity 8%~80%

Dimensions: 42 x 39.5 x 20mm

Certifications: FCC, UL, CE, ROHS

Radiator thermostat with bracket FLiRS

Z-Wave Plus (FLiRS function)

S2 unauthenticated

Built-in temperature sensor

Illuminated LED display

temperature rise function

Automatic open window detection (depends on radiator position)

Battery life: 6-12 months (depends on usage)

Doorbell Aeotec DoorBell 6

Z-Wave Doorbell

Visual and sound alerts

Small, discreet and aesthetic

OTA Firmware Update

Supports the S2 security framework

Low battery detection

Support up to 3 buttons

Multiple built-in sounds, up to 30

adjustable volume

Easy to install and use

Multisensor 6 Aeotec Z-Wave Plus

Multifunction sensor with Z-Wave Plus technology

6 functions in one device: motion detection, temperature, brightness, hygrometer, vibration and ultraviolet light)

Aeotec energy meter up to 60A

Compatible with Z wave Plus

It allows to measure the consumption of its habitat

Energy meter for three-phase system